Neda Zangeneh, PhD student, University of British Columbia


Biography: As a child, I developed a deep interest in the Earth: what was hidden beneath its surface, what it was made of and its ability to harbor natural resources via different processes. As I became older and familiar with my father's profession as a Civil Engineer, it fostered my desire to learn more about the Earth leading to completing my undergraduate degree in Civil Engineering in my home country, Iran. During my undergraduate studies I found soil and rock mechanics the most interesting subdiscipline in the field of Civil Engineering.

Having the first 'tools in my toolbox' regarding the principals of soil and rock mechanics, I followed my passion by doing a Master of Science in Geotechnical Engineering at Memorial University of Newfoundland, Canada. During two years of graduate studies, I was recognized as the "Fellow of the Graduate Students" by the faculty of graduate studies at the Memorial University.

For taking my passion to a higher level, I decided to continue my studies at the Ph.D. level at the University of British Columbia. I was lucky enough to get a research offer in the subject of Rock Engineering/Hydraulic Fracturing. The main focus of my studies is on numerical modeling of hydraulic fracturing in weak discontinuous rock mass. In the last two years, I worked on two different aspects of improving hydraulic fracturing design to increase the economic production of natural gas following reservoir stimulation. The results show great potential in providing a deeper understanding of the influence of pre-existing fractures as well as stress shadow effects on the propagation of hydraulically induced fractures.

Project: Numerical modeling of hydraulic fracturing in weak discontinuous rock mass

Vast resources of natural gas occur in very low permeability and fine-grained rocks, referred to as gas shales and tight sands. Successful exploitation of gas from gas shales and tight sands requires drilling horizontal boreholes and completions that include inducing fractures into the surrounding rock mass thereby creating enhanced permeability through larger surface areas for gas production.

The stability of the boreholes during horizontal drilling is dependent on the trade-off between pressure maintained in the borehole and the stress regime. The inducement of fractures into the reservoir rock is normally accomplished by pumping fluids with or without proppant under high pressures into the formation. The success of the horizontal boreholes as well as the volume of rock that is fractured (stimulated reservoir volume) during the fracturing process is dependent on mechanical properties of the rocks and the natural fracture network in the rock mass, the in-situ stress field and the mechanics of drilling and fracturing. The drilling of horizontal boreholes and subsequently fracturing (fracing) the reservoir rock is extremely expensive. In British Columbia, wells costing between 3 and 10 million dollars are typical in plays currently under development such as in the Horn River Basin. Thus optimally designing boreholes and the fracturing program to maximize production, and hence economic returns, are critical. The key to better borehole and fracture design involves understanding the effect of natural fracture network on hydraulic fracture propagation as well as response of the reservoir rock to in-situ and induced stresses during drilling and completions of fracing, which is the primary goal of this research.

Roundup 2013 Poster: Investigation of the Influence of Stress Shadows on Multiple Hydraulic Fractures from Adjacent Horizontal Wells Using the Distinct Element Method


Ph.D. Thesis - Neda Zangeneh
Numerical simulation of hydraulic fracture, stress shadow effects and induced seismicity in jointed rock, 2013 - Available digitally through the University of British Columbia (pdf, 18.33 MB)


Show printable version of '' in a New Window