Geoscience BC Report 2009-15

QUEST Project: 3D inversion modeling, integration, and visualization of airborne gravity, magnetic, and electromagnetic data, BC, Canada (NTS 93A, 93B, 93G, 93H, 93J, 93K, 93N, 93O, 94C, 94D)
by Nigel Phillips, Thi Ngoc Hai Nguyen and Vicki Thompson, Mira Geoscience Advanced Geophysical Interpretation Centre

Report Description
The Mira Geoscience Advanced Geophysical Interpretation Centre has completed 3D inversion modelling, integration, and visualization of airborne gravity, magnetic, and electromagnetic data for the QUEST project area, BC, Canada. This was undertaken for Geoscience BC as follow-up analysis of QUEST project geoscience data. The objective of this work is to provide useful 3D physical property products that can be directly employed in regional exploration to target prospective ground based on different exploration criteria.

QUEST Geophysical Data Blocks.  Click to open a larger version of this image.This work considers all airborne gravity, magnetic and electromagnetic data available for the QUEST project area. The inversions were performed using the UBC-GIF GRAV3D, MAG3D, and EM1DTM, suite of algorithms for the gravity, magnetic, and AEM data respectively. The products are 3D inversion models of density contrast, magnetic susceptibility, and electrical conductivity, and integrated products combining the individual physical property models. These are provided for each of the five regions of the project area (A, B, C, D, and NT).

The gravity and magnetic data were modelled in 3D using several smaller tiles after separation of regional signal. The tiles were combined to construct a detailed model over the whole area. The conductivity data were inverted for 1D (layered earth) models using a laterally parameterized method and subsequently interpolated in 3D. A late-time, background conductivity map has also been produced for the survey area. An estimate of the depth of penetration has been provided for the AEM conductivity models. The resulting models provide guidance to the regional structure and prospective geology and location of alteration and mineralization.

Final density contrast, magnetic susceptibility, conductivity models have been integrated into a Common Earth Model ready for 3D GIS analysis, interpretation, and integration with geologic, drill-hole, and other geophysical information. The extensive set of digital deliverable products that accompany this report include: physical property cut-off iso-surfaces, observed and predicted data, and the inversion models in several different, commonly used formats. A suite of 3D PDF scenes have been produced to aid in visualization and communication.

The resulting physical property models can be used to guide regional targeting and help design more detailed, follow-up data acquisition. The inclusion of geologic or physical property information in the inversion from maps, drill-holes, and samples was not within the scope of this project, although it is expected that the integration of these data would improve the resulting models, especially at the local scale.


Report Components

Refer to map above for project "block" locations (e.g. Block A).

REPORT
  • Final Report (pdf, 5 MB)
  • Appendix A: Data Deliverables (xls, 48 KB) -- Spreadsheet containing a list of deliverables and file names. Use this to navigate through deliverables listed below

    PDFs -- VTEM Profiles -- Observed and Predicted Data
    VTEM observed and predicted data profile plots
    Block A
    (zip, 41 MB)
    Block B
    (zip, 42 MB)
    Block C
    (zip, 43 MB)
    Block D
    (zip, 44 MB)
    Block NT
    (zip, 24 MB)

    PDFs -- VTEM Profiles -- Line Data and Conductivity Model
    VTEM profile plots and 1D conductivity models
    Block A
    (zip, 44 MB)
    Block B
    (zip, 44 MB)
    Block C
    (zip, 44 MB)
    Block D
    (zip, 46 MB)
    Block NT
    (zip, 26 MB)

    3-D PDFs - Survey Blocks
    3D PDF containing EW, NS and plans sections of the model, isosurface and topography
    Density
    (zip, 74 MB) All blocks
    Susceptibility
    (zip, 79 MB) All blocks
    Conductivity
    (zip, 79 MB) All blocks



DATA


MODELS
Conductivity Models


MODELS
Density and Susceptibility Models


MODELS
Gocad Projects
    Gocad Projects
    Each zip file contains the SRTM 500 m grid cell topography cropped to survey block extents; observed and predicted gravity and magnetic data surface for each tile; density and susceptibility models; conductivity model; mineral occurrences known in each survey block; and conductivity, density and susceptibility isosurfaces.
    Block A
    (zip, 144 MB)
    Block B
    (zip, 186 MB)
    Block C
    (zip, 186 MB)
    Block D
    (zip, 153 MB)
    Block NT
    (zip, 100 MB)


MODELS
Isosurfaces


MODELS
Physical Property Domains


MAPS


Suggested Reference
Phillips, N., Nguyen, T.N.H., and Thomson, V. (2009): QUEST Project: 3D inversion modelling, integration, and visualization of airborne gravity, magnetic, and electromagnetic data, BC, Canada; Geoscience BC, Report 2009-15, 79 p.

Additional Links

Search Other Projects
If you are interested in other Geoscience BC Projects of this type or in this area, try searching through all our projects:

Back to Data Releases Main Page
 


Show printable version of 'GBC Report 2009-15' in a New Window